Product Details
M-500
Description
The POPE Professional® introduces new Class D amplifier technology offering smooth and responsive handling with massive power output while maintaining POPE Professional's famous sonic integrity. The POPE Professional M Series is using SMPS technology, the resulting high power, lightweight units designed for install and professional touring sound applications.
The POPE Professional® M Series is a range of 4 channels, high output power amplifiers. The M Series has been designed to provide that, Powerful Pure Sonic Performance which is now so synonymous with the POPE Professional® brand name. With the introduction of the M Series POPE Professional® aim to deliver simple, pure and reliable power for applications where cost and ease of use are paramount without lose of integrity.
MORE INFO
M-500
Applications
-
- Stadium
- Concerts
- Touring events
- Clubs and Discos
- Places of worship
- Theatre and Auditorium
- Educational Institutions
Features
- Class - D Technology
- Power Factor Correction
- Four-channel flexibility
- XLR input and output connectors
- Self protection design
- Efficient cooling system
- Comprehensive protection
Power Output
Ratings (RMS @ 1% THD @ 230VAC)
|
Model |
Total Channels |
4Ω Per Channel |
8Ω Per Channel |
4Ω Bridged |
8Ω Bridged |
70/100V |
|
M-500 |
4 |
500W |
250W |
2*1250W |
2*1250W |
2*800W |
|
M-800 |
4 |
800W |
400W |
2*2500W |
2*1600W |
2*1600W |
|
M-1250 |
4 |
1250W |
1250W |
- |
- |
2*800W |
|
M-2500 |
4 |
2500W |
1600W |
- |
- |
4*1600W |
Specifications
|
THD |
<
0.05 % (20 Hz - 20 kHz, 8Ω load, 3 dB below rated power) |
|
Signal-to-Noise
Ratio |
>
120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load) |
|
Frequency
Response |
20
Hz - 20 kHz ± 0.25 dB / 20 Hz - 20 kHz Ω ± 0.15 dB (8Ω load, 1 dB below rated
power) |
|
Output
Circuitry |
Class
D - full bandwidth PWM modulator with ultra low distortion |
|
Input
impedance |
15
k balanced |
|
Damping
Factor |
>
2000 (8Ω load, 1 kHz and below) |
|
|
|
|
Gain
and Level |
|
|
Amplifier
gain selectable (Sensitivity) |
0.7
/ 1.0 / 1.44
Volt |
|
Level
adjustment (per ch) |
Front-panel
potentiometer |
|
|
|
|
Connectors
and Switches |
|
|
Input
connectors (per ch) |
3-pin
XLR, electronically balanced |
|
Output
connectors (per ch) |
3-pin
XLR, electronically balanced |
|
Amplifier
Output |
4
Pin Speakon 1: +1-1 CH-1, +2-2 CH-2 & 4 Pin Speakon 2: +1-1 CH-2 |
|
|
4
Pin Speakon 3: +1-1 CH-3, +2-2 CH-4, 4 Pin Speakon 4: +1-1 CH-4 |
|
Mode |
M-500,
M-800 Stereo / Parallel / Bridge |
|
|
M-1250,
M2500 Stereo / Parallel |
|
Power
on/off |
on
front-panel switch |
|
Cooling |
Fans,
front-to-rear airflow |
|
|
|
|
Front-panel
indicators |
|
|
Per
channel |
Power
/ Output signal / Limit / Protect |
|
Parallel |
1
& 2, 3 & 4 Channels |
|
|
|
|
Safety |
|
|
Protection
Circuits |
Input
limiter, short circuit protection, DC protection of output, under & over
voltage protection, SOA protection, intelligent mains fuse protection, power
stage overload protection, temperature protection for transformer |
|
|
|
|
Power |
|
|
Type |
Universal
& regulated switch mode power supply with Power Factor Correction |
|
Operating
voltage |
Universal
Mains, 90-270V AC |
|
Mains |
Power
Cord |
|
Model |
M-500 |
M-800 |
M-1250 |
M-2500 |
|
Amplifier
Dimension |
482 mm x 374 mm x 88 mm (W x D x H) |
482 mm x 540 mm x 88 mm (W x D x H) |
||
|
Packing
Dimension |
535 mm x 455 mm x 195 mm (W x D x H) |
535 mm x 615 mm x 195 mm (W x D x H) |
||
|
Size |
2U |
|||
|
NetWeight |
9.30 kg |
9.60 kg |
13.80 kg |
14.30 kg |
|
Gross
Weight |
10.80 kg |
11.10 kg |
15.70 kg |
16.20 kg |
Note:
1) All
specifications are typical values.
2)The amplifier will be fully
operational at 2 ohm loads, but due to physical constraints in the
construction, this mode of operation is not recommended.
3)The M-500 & M-800
amplifiers have to select bridge mode for 70/100V operation.