Product Details
M-2500
Description
The POPE Professional® introduces new Class D amplifier technology offering smooth and responsive handling with massive power output while maintaining POPE Professional's famous sonic integrity. The POPE Professional M Series is using SMPS technology, the resulting high power, lightweight units designed for install and professional touring sound applications.
The POPE Professional® M Series is a range of 4 channels, high output power amplifiers. The M Series has been designed to provide that, Powerful Pure Sonic Performance which is now so synonymous with the POPE Professional® brand name. With the introduction of the M Series POPE Professional® aim to deliver simple, pure and reliable power for applications where cost and ease of use are paramount without lose of integrity.
MORE INFO
M-2500
Applications
-
- Stadium
- Concerts
- Touring events
- Clubs and Discos
- Places of worship
- Theatre and Auditorium
- Educational Institutions
Features
- Class - D Technology
- Power Factor Correction
- Four-channel flexibility
- XLR input and output connectors
- Self protection design
- Efficient cooling system
- Comprehensive protection
Power Output
Ratings (RMS @ 1% THD @ 230VAC)
Model | Total Channels | 4Ω Per Channel | 8Ω Per Channel | 4Ω Bridged | 8Ω Bridged | 70/100V |
M-500 | 4 | 500W | 250W | 2*1250W | 2*1250W | 2*800W |
M-800 | 4 | 800W | 400W | 2*2500W | 2*1600W | 2*1600W |
M-1250 | 4 | 1250W | 1250W | - | - | 2*800W |
M-2500 | 4 | 2500W | 1600W | - | - | 4*1600W |
Specifications
THD | < 0.05 % (20 Hz - 20 kHz, 8Ω load, 3 dB below rated power) |
Signal-to-Noise Ratio | > 120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load) |
Frequency Response | 20 Hz - 20 kHz Ω ± 0.25 dB / 20 Hz - 20 kHz Ω ± 0.15 dB (8Ω load, 1 dB below rated power) |
Output Circuitry | Class D - full bandwidth PWM modulator with ultra low distortion |
Input impedance | 15 k balanced |
Damping Factor | > 2000 (8Ω load, 1 kHz and below) |
| |
Gain and Level | |
Amplifier gain selectable (Sensitivity) | 0.7 / 1.0 / 1.44 Volt |
Level adjustment (per ch) | Front-panel potentiometer |
| |
Connectors and Switches | |
Input connectors (per ch) | 3-pin XLR, electronically balanced |
Output connectors (per ch) | 3-pin XLR, electronically balanced |
Amplifier Output | 4 Pin Speakon 1: +1-1 CH-1, +2-2 CH-2 & 4 Pin Speakon 2: +1-1 CH-2 |
| 4 Pin Speakon 3: +1-1 CH-3, +2-2 CH-4, 4 Pin Speakon 4: +1-1 CH-4 |
Mode | M-500, M-800 Stereo / Parallel / Bridge |
| M-1250, M2500 Stereo / Parallel |
Power on/off | on front-panel switch |
Cooling | Fans, front-to-rear airflow |
| |
Front-panel indicators | |
Per channel | Power / Output signal / Limit / Protect |
Parallel | 1 & 2, 3 & 4 Channels |
| |
Safety | |
Protection Circuits | Input limiter, short circuit protection, DC protection of output, under & over voltage protection, SOA protection, intelligent mains fuse protection, power stage overload protection, temperature protection for transformer |
| |
Power | |
Type | Universal & regulated switch mode power supply with Power Factor Correction |
Operating voltage | Universal Mains, 90-270V AC |
Mains | Power Cord |
Model | M-500 | M-800 | M-1250 | M-2500 |
Amplifier Dimension | 482 mm x 374 mm x 88 mm (W x D x H) | 482 mm x 540 mm x 88 mm (W x D x H) | ||
Packing Dimension | 535 mm x 455 mm x 195 mm (W x D x H) | 535 mm x 615 mm x 195 mm (W x D x H) | ||
Size | 2U | |||
NetWeight | 9.30 kg | 9.60 kg | 13.80 kg | 14.30 kg |
Gross Weight | 10.80 kg | 11.10 kg | 15.70 kg | 16.20 kg |
Note:
1) All specifications are typical values.
2) The amplifier will be fully operational at 2 ohm loads, but due to physical constraints in the construction, this mode of operation is not recommended.
3)The M-500 & M-800 amplifiers have to select bridge mode for 70/100V operation.