Product Details
MC-7200
Description
The POPE Professional® MC Series amplifiers are specially designed for touring and installation. It unique design and powerful output can meet the requirement of any sound reinforcement project.
MORE INFO
MC-7200
Applications
-
- Stadium
- Dance hall,
- Concerts
- Touring
- Live performances.
Features
- CLASS H circuit to improve the power amplifiers efficiency, stability & decrease the temperature in operation.
- Short-circuit protection, over- temperature protection and DC protection.
- The fan with variable speed for cooling.
- Built-in compressor function to prevent the power amplifier from distortion of over input.
Power Output
Ratings (RMS @ 1% THD @ 230VAC)
|
Model |
MC-7200 |
MC-8200 |
||
|
Number of channels |
2 |
2 |
||
|
Total output all channels driven |
3000 W @ 4 ohms |
4600 W @ 4 ohms |
||
|
Max. Output Power |
4 ohms |
8 ohms |
4 ohms |
8 ohms |
|
Per channel watts |
1500 W |
1000 W |
2300 W |
1300 W |
|
Per channel watts |
3000 W |
1900 W |
4600 W |
3000W |
Specifications
|
Frequency Response |
±0.1 dB from 20 Hz to 20 kHz at 1 watt |
|
|
Phase Response |
±10 degrees from 10 Hz to 20 kHz at 1 watt |
|
|
THD |
0.05% |
|
|
Intermodulation Distortion (IMD) |
<0.35% (60 Hz and 7 kHz at 4:1, from full rated output to -30dB) |
|
|
Signal-to-Noise Ratio |
>105 dB A-weighted or 100 dB unweighted below rated power, 20 Hz - 20 kHz. |
|
|
CMRR (20 Hz to 1 kHz) |
> 55 dB, typically > 70 dB |
|
|
Crosstalk |
> 80 dB (below rated power, 20 Hz to 1 kHz) |
|
|
Slew Rate |
80V/usec |
|
|
Damping Factor |
>2000 from 10 Hz to 400 Hz |
|
|
Input Impedance (Nominal) |
20KΩ Balanced |
|
|
Signal Input |
Two balanced 3-pin female XLR connectors |
|
|
Signal Output |
Parallel two balanced 3-pin male XLR connectors |
|
|
Input sensitivity gain |
0.775 / 1.0 / 1.44 Volt |
|
|
Output Circuitry |
Class H |
|
|
Output Connector |
Two sets of Red & Black color coded binding posts & 2 Speakon 4 pole chassis connector |
|
|
Connectors |
3-pin XLR, Speakon 4 pole chassis connector |
|
|
LED Indicator |
Power, Signal, Protect, Clip |
|
|
Protection |
Protected against shorted, open or mismatched loads, overloaded power supplies, excessive temperature, chain destruction phenomena, input overload damage and high-frequency blowups. Also protect loudspeakers from input/output DC and turn-on/turn-off transients. |
|
|
Cooling System |
Internal heat sinks fitted with four variable speed fans for uniform heat dissipation from rear to front air flow |
|
|
Construction |
Steel chassis with durable black powder coat finish and aluminium front panel |
|
|
Power Supply |
Toroidal Transformer |
|
|
Power Range |
200 - 240V AC @ 50Hz |
|
|
Mains |
Powercord |
|
|
Input Power (Watts) |
1600W |
1900W |
|
Dimension (W x D x H) |
482 mm x 443.5 mm x 88.8 mm |
482 mm x 468 mm x 132 mm |
|
Size |
2U |
3U |
|
Net Weight |
23.5 Kg |
26.6 Kg |
|
Gross Weight |
33.0 Kg |
37.0 Kg |
Note:
1) All specifications are typical values.
2) The amplifier will be fully operational at 2 ohm loads, but due to physical constraints in the construction, this mode of operation is not recommended.
3) The output power measured with 1kHz, 20ms burst, both channels driven