+91 90428 22444

info@pope-pro.com

POPE Professional Acoustics Limited

Product Details

Go Back
Product Image
TA-10

Description

The POPE Professional® T Series, TA-10 is a two-way Passive Line Array Speaker and it's powered by T-18BF flyable Sub-woofer. One T-18BF flyable Sub-woofer can power the two TA-10 Line Arrays.  The POPE Professional's innovated rigging hardware can fly 8 cabinets array with 9:1 safety standard. The 35 mm pole mount is making the system easy to use for smaller venues and front fill application.

The POPE Professional's T-18BF flyable sub-woofer have the same outer entire steel and aluminium rigging hardware like TA-10 Line Array and it can be hang together. Also TA-10 Line Array can be stacked on T-18BF as ground stacking array system. 

The POPE Professional T-18BF flyable sub-woofer utilizes an 18” LF transducer and provides extremely high levels of tight, punchy bass to the lowest octave of human hearing. The TA-10 Line Array utilizes a 10” LF transducer and a 1.4” throat HF compression driver. It's engineered both a companion and applications requiring extremely high output in a relatively small package. For fixed applications, the T-18BF flyable sub-woofer offers you reliable top high end quality sound.

The T-18BF flyable sub-woofer is having on board Analog and AES67 digital inputs / outputs, FIR / IIR filters and SoundNet® Ultra® Networking.


MORE INFO

TA-10

Applications

    • Small and medium-scale Live Sound Reinforcement events           
    • Arenas
    • live theaters
    • concert venues
    • corporate AV
    • Places of worship

Features

    • High efficiency and light weight Neodymium Drivers 
    • HF horn and Phase Aligned LF drivers for exceptional 100° horizontal coverage pattern
    • 9:1 safety standard rigging hardware
    • 10" LF and 1.4” throat Compression driver
    • Powered by 18” Sub-woofer

Specifications

Model

TA-10 & T-18BF

Class  

Two way Line Array Speaker & Flyable Powered Sub-woofer

Frequency Response   

24Hz - 20kHz

Horizontal Coverage Angle

100°

Vertical Coverage Angle

10°

Rigging Hardware

Heat treated steel front and aluminium rear fittings, from 0° to 10° Angle adjustable slots

SPL**

126dB Continuous, 135dB peak



Electronics


Amplifier 


Model

B-10

Total Power

10000W Peak, 5000W RMS Continuous

Amplifier Output (Sub)

5000W Peak, 2500W Continuous

Amplifier Output (CH-3 & CH-4)

5000W Peak, 1250W + 1250W @ 4Ω Continuous

Speakon Wiring

CH-3: +1 -1 and CH-4: +2 -2

Cooling

Aluminium heat Sink with Fan

Power Connector

In with Rubber sealing cover

Power

AC 85-265V @ 50-60Hz

Processor

 

In/Out

1 In / 4 Out

DSP

32 bit / 48kHz DSP

Filters

FIR / IIR, Gain, Compressor, Limiter, Delay, EQ, Crossover

Analog Signal

Balanced Input / Output

Digital Signal

AES67

Connectors

XLR male / female and Ethernet 

Control

Ethernet - SoundNet® Ultra® Networking

Preset

20

 

For more specifications about DSP, check the DSP-4040 product catalogue.

Transducer

 

High Frequency 

1*1.4" Throat POPE Professional® Compression driver

Voice Coil Diameter

75 mm (3")

Magnet Material

Neodymium

Diaphragm Material

Titanium

Speakon Wiring

+2, -2

Low Frequency 

1*10" (250 mm) Diameter POPE Professional® Transducer

Voice Coil Diameter

78.91 mm (3”)

Magnet Material

Neodymium

Speakon Wiring

+1, -1

Sub-woofer

1*18" (457 mm) Diameter POPE Professional® Transducer

Voice Coil Diameter

100 mm (4”)

Magnet Material

Ferrite

Enclosure

 

Box Construction

15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal Line Array & 

 

18 mm, 11-ply birch Faced plywood Rectangle Flyable Sub-woofer enclosure

Grille

Powder coated, black, 16-gauge perforated steel grille

Surface Finish 

SoundFlex® environment friendly coating

Suspension System 

Integral hinge bars, quick release pins & 35mm pole mount

Packing

Foam with wooden crate carton box packing

Model

TA-10

T-18BF

Dimensions (H x W x D)

325 mm × 550 mm × 352 mm

660 mm × 550 mm × 742 mm

Net Weight

22 kg

70 kg

Gross Weight

29 kg

81 kg