Product Details

Go Back

TA-10 & TA- 18BF

Description

The POPE Professional TA Series, TA-10 is a two-way Passive Line Array Speaker and it's powered by TA-18BF flyable Sub-woofer. One TA 18BF flyable Sub-woofer can power the two TA-10 Line Arrays. The POPE Professional's innovated rigging hardware can fly 8 cabinets array with 9:1 safety standard. The 35 mm pole mount is making the system easy to use for smaller venues and front fill application.

The POPE Professional's TA-18BF flyable sub-woofer have the same outer entire steel and aluminium rigging hardware like TA-10 Line Array and it can be hang together. Also TA-10 Line Array can be stacked on TA-18BF as ground stacking array system.

The POPE Professional TA-18BF flyable sub-woofer utilizes an 18" LF transducer and provides extremely high levels of tight, punchy bass to the lowest octave of human hearing. The TA-10 Line Array utilizes a 10" LF transducer and a 1.4" throat HF compression driver. It's engineered both a companion and applications requiring extremely high output in a relatively small package.

The TA-18BF flyable sub-woofer is having on board FIR/IIR filters, Analog In/Out, AESOP digital signal In/Out and SoundNet Networking. The customer can add POPE Professional SN-2 AES67 Network module or SN-4 Dante Network module at any time to enable digital networking. The SN-2 AES67 or SN-4 Dante module is an optional.

MORE INFO

TA-10 & TA- 18BF

Applications

- Small and medium-scale Live Sound Reinforcement events
- Arenas
- Live theaters
- Concert venues
- Corporate AV
- Places of worship

Features

- High efficiency and light weight Neodymium Drivers
- HF horn and Phase Aligned LF drivers for exceptional 100° horizontal coverage pattern
- 9:1 safety standard rigging hardware
- 10" LF and 1.4" Throat Compression driver
- Powered by 18 " Sub-woofer
- Class-D amplification
- Built-in DSP
- FIR/IIR Filters
- Dante / AES67 / AESOP / Analog Input
- 40 bit floating point / 96kHz DSP Processing

Specifications

Model	TA-10 & TA-18BF
Class	Two way Line Array Speaker & Flyable Powered Sub-woofer
Frequency Response	24Hz - 20kHz
Horizontal Coverage Angle	100°
Vertical Coverage Angle	10°
Rigging Hardware	Heat treated steel front and aluminium rear fittings, from 0° to 10° Angle adjustable slots
SPL**	126dB Continuous, 135dB peak
Electronic
Amplifier
Model	VT-6
Total Power	10000W Peak, 5000W RMS Continuous
Amplifier Output (Sub)	5000W Peak, 2500W Continuous
Amplifier Output (CH-3 & CH-4)	5000W Peak, 1250W + 1250W @ 4 Ω Continuous
Speakon Wiring	CH-3: +1 -1 and CH-4: +2 -2
Cooling	Aluminium heat Sink with Fan
Power Connector	In with Rubber sealing cover
Power	AC 85-265V @ 50-60Hz
Processor
In/Out	4 In / 4 Out
DSP	40 bit / 96kHz DSP
Filters	FIR / IIR, Frequency, Gain, RMS, Peak, Dynamic Limiter
Analog Signal	Balanced Input / Output
Digital Signal	Dante® / AES67 / AESOP (SN-2 AES67 / SN-4 Dante Module - Optional)
Connectors	XLR male / female and Ethernet
Control	Ethernet - SoundNet*® Networking
Preset	24
Transducer
High Frequency	1*1.4" Throat POPE Professional® Compression driver
Voice Coil Diameter (HF)	75 mm (3")
Magnet Material (HF)	Neodymium
Diaphragm Material	Titanium
Speakon Wiring (HF)	+2, -2
Low Frequency	1*10" (250 mm) Diameter POPE Professional® Transducer
Voice Coil Diameter (LF)	78.91 mm (3")
Magnet Material (LF)	Neodymium
Speakon Wiring (LF)	+1, -1
Sub-woofer	1*18" (457mm) Diameter POPE Professional® Transducer
Voice Coil Diameter (Sub)	100 mm (4")
Magnet Material (Sub)	Ferrite
Enclosure
Box Construction	16 mm Waterproof Engineered Wood (Line Array), 18 mm Waterproof Engineered Wood (Sub-woofer enclosure)
Grille	Powder coated, black, 16-gauge perforated steel grille
Surface Finish	SoundFlex® environment friendly coating
Suspension System	Integral hinge bars, quick release pins & 35mm pole mount
Packing	Foam with wooden crate carton box packing

Model	TA-10	TA-18 BF
Dimensions (H x W x D)	325mm x 550 mm x 352 mm	660 mm x 550 mm x 742mm
Net Weight	22 kg	70 kg
Gross Weight	29 kg	81 kg