Product Details
TT - 10
Description
The POPE Professional® TT series, TT-10 is a two-way Powered Line Array utilizes POPE Professional® 10†transducer and the 1.4†throat compression driver with new technology Directivity Correction Horn (DCH) ensures the constant directivity in the high frequency range. The Waveguide Physical Driver (WPD) increases the output, sensitivity and also improves the directivity of the low frequency range. The high and low frequency neodymium magnet drivers are integrates higher efficiency and power handling with reduced weight and dimension.
The newly designed bass reflex enclosure has internal symmetrical heat-dispersion tubes to prevent the system from overheating. The POPE Professional's innovated rigging hardware can fly 16 cabinets array with 1:9 safety standards. Each TT-10 speaker will be powered by POPE Professional® VT-1 built in amplifier module.
The TT Series Line Array is having on board FIR/IIR filters, Analog In/Out, AESOP digital signal In/Out and SoundNet® Networking. The customer can add POPE Professional® SN-2 AES67 Network module or SN-4 Dante Network module at any time to enable digital networking. The SN-2 AES67 or SN-4 Dante module is an optional.
MORE INFO
TT - 10
Applications
-
- Touring soundÂ
- Small and medium-scale Live Sound
- Arenas, live theaters, concert venues, corporate AV, Places of worshipÂ
- Delay systems for large scale outdoor sound reinforcement
Features
- FIR/IIR Filters
- Dante / AES67 / AESOP / Analog Input
- 40 bit floating point / 96kHz DSP Processing
- Neodymium Drivers
- 90° x 10° (H x V) Coverage
- 1:9 safety standard rigging hardware
- 10" LF and 1.4†throat Compression driver
- Powered by built in amplifier module
- Class-D amplification
- Supplied with SoundNet® Networking software
- Ethernet Connectivity
- 24 bit AD/DA converters
- Built-in DSP
Specifications
|
Model |
TT-10 |
|
Class |
Two way Powered Line Array Speaker |
|
Frequency Response |
80Hz - 20kHz |
|
Horizontal Coverage Angle |
90° |
|
Vertical Coverage Angle |
10° |
|
Flying Kit |
Heat treated aluminium, front and rear fittings, from 0° to 10° Angle
adjustable slots |
|
SPL** |
125dB Continuous, 133dB peak |
| Electronic | |
| Amplifier | |
|
Model |
VT-3 |
|
Total Power |
6600W Peak, 3300W RMS Continuous |
|
High Frequency |
1600W Peak, 800W RMS Continuous |
|
Low Frequency |
5000W Peak, 2500W RMS Continuous |
|
Cooling |
Aluminium heat Sink with Fan |
|
Power Connector |
In / Out with Rubber sealing cover |
|
Power |
AC 85-265V @ 50-60Hz |
|
Processor |
|
|
In/Out |
4 In / 4 Out |
|
DSP |
40 bit / 96kHz DSP |
|
Filters |
FIR / IIR, Frequency, Gain, RMS, Peak, Dynamic Limiter |
|
Analog Signal |
Balanced Input / Output |
|
Digital Signal |
Dante® / AES67 / AESOP (SN-2 AES67 / SN-4 Dante Module - Optional) |
|
Connectors |
XLR male / female and Ethernet |
|
Control |
Ethernet - SoundNet® Networking |
|
Preset |
24 |
|
DSP Details |
For more specifications about DSP, check the XT-4040 product
catalogue. |
|
Transducer  |
|
|
High Frequency |
1*1.4" Throat POPE Professional® Compression driver |
|
Voice Coil Diameter |
75 mm (3â€) |
|
Magnet Material |
Neodymium |
|
Throat Diameter |
35.56 mm (1.4â€) |
|
Diaphragm Material |
Titanium |
|
Low Frequency |
1*10" (250 mm) Diameter POPE Professional® Transducer |
|
Voice Coil Diameter |
79.04 mm (3â€) |
|
Magnet Material |
Neodymium |
|
Enclosure |
|
|
Box Construction |
15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure |
|
Finish |
SoundFlex® environmental friendly coating |
|
Suspension System |
Integral hinge bars, quick release pins & 35mm dual pole mount |
|
Grille |
Powder coated, black, 16-gauge perforated steel grille with charcoal
foam backing |
|
Packing |
Foam with wooden crate carton packing |
|
Dimensions (H x W x D) |
325 mm × 550 mm × 414 mm |
|
Net Weight |
27 kg |
|
Gross Weight |
34 kg |