Product Details
TT - 112
Description
The POPE Professional® TT series, TT-112 is a two-way powered Line Array system. The Line Array speaker consists of POPE Professional® single 12†Neodymium woofer and a 36 mm exit throat Neodymium compression driver. These are circuited independently, mounted in separate bass reflex enclosure. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced transducers are providing high power-to-weight ratio.
The POPE Professional® TT-112 Line Array Speaker utilizes Line Source Former Technology Horn, High power maximum SPL 118dB continuous,126dB peak, Wide bandwidth 80Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal Mid and HF pattern control, Fast integral rigging system with variable splay angles from 0° to 10°, 1°step.
The enclosure constructed with 15 mm birch faced plywood, screwed and glued together for maximum strength and rigidity. The TT-112 systems are designed to be powered by POPE Professional® Class-D amplification. The TT Series Line Array is having on board FIR/IIR filters, Analog In/Out, AESOP digital signal In/Out and SoundNet® Networking. The customer can add POPE Professional® SN-2 AES67 Network module or SN-4 Dante Network module at any time to enable digital networking. The SN-2 AES67 or SN-4 Dante module is an optional.
MORE INFO
TT - 112
Applications
-
- Touring sound
- Small and medium-scale Live Sound
- Arenas, live theaters, concert venues, corporate AV, Places of worship
- Delay systems for large scale outdoor sound reinforcement
- Live sound open-air venues, arenas, concerts, fixed installations, multi-purpose auditoria, sports venues and etc..
Features
- FIR/IIR Filters
- Dante / AES67 / AESOP / Analog Input
- 40 bit floating point / 96kHz DSP Processing
- Neodymium Drivers
- 90° x 10° (H x V) Coverage
- 1:9 safety standard rigging hardware
- 1*12" LF and 1.4†throat Compression driver
- Class-D amplification
- Supplied with SoundNet® Networking software
- Ethernet Connectivity
- 24 bit AD/DA converters
- Built-in DSP
Specifications
Model | TT-112 |
Class | Two way Powered Line Array Speaker |
Frequency Response | 80Hz - 20kHz |
Horizontal Coverage Angle | 90° |
Vertical Coverage Angle | 10° |
Flying Kit | Heat treated aluminium, front and rear fittings, from 0° to 10° Angle adjustable slots |
SPL** | 118dB Continuous, 126dB Peak |
Amplifier | |
Model | VT-3 |
Total Power | 6600W Peak, 3300W RMS Continuous |
High Frequency | 1600W Peak, 800W RMS Continuous |
Low Frequency | 5000W Peak, 2500W RMS Continuous |
Cooling | Aluminium heat Sink with Fan |
Power Connector | In / Out with Rubber sealing cover |
Power | AC 85-265V @ 50-60Hz |
Processor | |
In/Out | 4 In / 4 Out |
DSP | 40 bit / 96kHz DSP |
Filters | FIR / IIR, Frequency, Gain, RMS, Peak, Dynamic Limiter |
Analog Signal | Balanced Input / Output |
Digital Signal | Dante® / AES67 / AESOP (SN-2 AES67 / SN-4 Dante Module - Optional) |
Connectors | XLR male / female and Ethernet |
Control | Ethernet - SoundNet® Networking |
Preset | 24 |
Note | For more specifications about DSP, check the XT-4040 product catalogue. |
Transducer | |
High Frequency | 1*1.4†Throat POPE Professional Compression driver |
Voice Coil Diameter (HF) | 75 mm (3â€) |
Magnet Material (HF) | Neodymium |
Throat Diameter | 33.56 mm (1.4â€) |
Diaphragm Material | Titanium |
Low Frequency | 1*12" (305 mm) Diameter POPE Professional® Transducer |
Voice Coil Diameter (LF) | 102.01 mm (4â€) |
Magnet Material (LF) | Neodymium |
Enclosure | |
Box Construction | 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure |
Finish | SoundFlex® environmental friendly coating |
Suspension System | Integral hinge bars and quick release pins |
Grille | Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing |
Packing | Foam with wooden crate carton packing |
Dimensions (H x W x D) | 405 mm × 676 mm × 532 mm |
Net Weight | 42 kg |
Gross Weight | 51 kg |