Products
All Products
ML-112
The POPE Professional® ML-112 is a two-way Line Array system. The Line Array speaker consist of one 12" Neodymium woofer and one 36 mm exit throat Neodymium compression driver. These are circuited independently, mounted in separate bass reflex enclosure. The Line Source Former Horn produces wave front similar to ribbon driver.The POPE Professional® ML-112 Line Array Speaker utilizes patented Line Source Former Technology Horn, High power maximum SPL 118dB continuous,126dB peak, Wide bandwidth 80Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal Mid and HF pattern control, Fast integral rigging system with variable splay angles from 0° to 10°, 1°step. The 35 mm pole mount is making the system easy to use for smaller venues and front fill application.The enclosure constructed with 3/4" (18 mm) birch plywood, screwed and glued together for maximum strength and rigidity. The rear panel carries 2 x 4 Pin Speakon Speakon® connector. The ML-112 systems are designed to be powered by POPE Professional® power amplifiers. The POPE Professional® XT Series digital signal processor is available to provide Crossover, Delay, Equalizer and Limiter function
ML-12
The POPE Professional® ML-12 is a three-way Line Array system. The Line Array speaker consist of one 12" Neodymium woofer that is circuited independently, mounted in separate bass reflex enclosure and four high efficiency power handling 6.5" Neodymium high mid range transducers are mounted in a V-shaped configuration combined with two 36 mm exit throat Neodymium compression drivers coupled to individual Waveguides those are vertically aligned. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced European transducers are providing high power-to-weight ratio.The POPE Professional® ML-12 Line Array Speaker utilizes patented Line Source Former Technology Horn, High power maximum SPL 125dB continuous,136dB peak, Wide bandwidth 80Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal mid and HF pattern control, Fast integral rigging system with variable splay angles from 0°to 10°, 1°step.The enclosure constructed with 3/4" (18 mm) birch plywood, screwed and glued together for maximum strength and rigidity. The rear panel carries 2 x 8 pin Speakon connector. The ML-12 systems are designed to be powered by POPE Professional® power amplifiers. The POPE Professional® XT Series digital signal processor is available to provide Crossover, Delay, Equalizer and Limiter functions.
ML-212
The POPE Professional® ML-212 is a Four-way Line Array speaker system designed for large venues and live concert. The Line Array speaker consist of two 12" Neodymium woofer that is circuited parallel, mounted in separate bass reflex enclosure and four high efficiency power handling 6.5" Neodymium high mid range transducers are mounted in a V-shaped configuration combined with two 36mm exit throat Neodymium compression drivers coupled to individual Waveguides those are vertically aligned. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced European transducers are providing high power-to-weight ratio.The POPE Professional® ML-212 Line Array Speaker utilizes patented Line Source Former Technology Horn, High power maximum SPL 130dB continuous, 138dB peak, Wide bandwidth 80Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal mid and HF pattern control, Fast integral rigging system with variable splay angles from 0°to 10°, 1°step.The enclosure constructed with 3/4" (18 mm) birch plywood, screwed and glued together for maximum strength and rigidity. The rear panel carries 2 x 8 pin Speakon connector. The ML-212 systems are designed to be powered by POPE Professional® power amplifiers. The POPE Professional® XT Series digital signal processor is available to provide Crossover, Delay, Equalizer and Limiter functions
GL-18B
The POPE Professional® GL-18B is a Horn-Loaded and high power, high output sub-woofer designed for touring and permanent sound reinforcement. The bass reflex design features 6" voice coil, long excursion 18" Neodymium transducer mounted in a mechanically and acoustically optimized, rugged weather resistant horn loaded enclosure. Integrated handles allow for easy setup, loading and transportation. Featuring a massive 18" Neodymium transducer is delivering 126 dB of continuous SPL, the GL-18B raises the low frequency performance bar to next level. The GL-18B Folded Horn delivers more bass per square inch than other Sub-woofer designs and includes a curved horn mouth bracing for smoother frequency response and extra deep 35mm pole cups for increased stability with full-range speakers. The enclosure is constructed with 18 mm 11-ply birch faced plywood and is coated with a weather and wear resistant black textured SoundFlex® coating.
GL-218B
The POPE Professional® GL-218B sub-woofer utilizes horn loaded enclosure. The system incorporate two 18" Neodymium transducers. The sub-woofer produces sound pressure level (SPL) of 128 dB on axis at 1 meter with a power input of 1 watt and having capable to produce peak output of 136 dB SPL on axis at 1 meter. The sub-woofer can handle 4000 watts power (continuous) with 24dB/octave Butter-worth high pass filter. The sub-woofer enclosure constructed of exterior grade 18 mm plywood. The enclosure is constructed with 18 mm 11-ply birch faced plywood and is coated with a weather and wear resistant black textured SoundFlex® coating.
GL-21B
The POPE Professional® GL-21B is a Horn-Loaded and high power, high output sub-woofer designed for touring and permanent sound reinforcement. The bass reflex design features 6" voice coil, long excursion 21" Neodymium transducer mounted in a mechanically and acoustically optimized, rugged weather resistant enclosure. Integrated handles allow for easy setup, loading and transportation. Featuring a massive 21" Neodymium transducer is delivering 136 dB of Maximum SPL, the GL-21B raises the low frequency performance bar to next level. The GL-21B Folded Horn delivers more bass per square inch than other Sub-woofer designs and includes a curved horn mouth bracing for smoother frequency response and extra deep 35mm pole cups for increased stability with full-range speakers. The enclosure is constructed with 18 mm 11-ply birch faced plywood and is coated with a weather and wear resistant black textured SoundFlex® coating.
GL-12CX
The POPE Professional® GL-12CX is an ultra-compact, high performance coaxial stage monitor which combines maximum enclosure volume with optimum presentation angle in a low profile and contemporary design. It features a high-performance 12" (300 mm) Ferrite Coaxial driver unit mounted on a differential dispersion enclosure.
GL-15CX
The POPE Professional® GL-15CX is a compact, high performance 15" coaxial stage monitor combining high output and controlled dispersion with discreet, contemporary design. It features a high performance 15" (380 mm) Ferrite Coaxial driver unit mounted on a differential dispersion enclosure. Differential dispersion technology increases the area over which a constant SPL and consistent frequency response is maintained at ear height, enabling the artist to move around the stage more freely.
TH-612
The POPE Professional® TH-612, TH-615, TH-625, TH-635, TH-618B and TH-628B loudspeakers are designed for distributed sound reinforcement and small outdoor venues. The system is based on low frequency drivers with high frequency compression driver coupled to horn. The enclosure is trapezoidal shape to reduce cabinet reflection causing colorations. The enclosure made of 15 mm and 18 mm birch faced plywood glued together in conjunction with dado joints to assure the highest quality of robustness.
TH-615
The POPE Professional® TH-612, TH-615, TH-625, TH-635, TH-618B and TH-628B loudspeakers are designed for distributed sound reinforcement and small outdoor venues. The system is based on low frequency drivers with high frequency compression driver coupled to horn. The enclosure is trapezoidal shape to reduce cabinet reflection causing colorations. The enclosure made of 15 mm and 18 mm birch faced plywood glued together in conjunction with dado joints to assure the highest quality of robustness.
TH-625
The POPE Professional® TH-612, TH-615, TH-625, TH-635, TH-618B and TH-628B loudspeakers are designed for distributed sound reinforcement and small outdoor venues. The system is based on low frequency drivers with high frequency compression driver coupled to horn. The enclosure is trapezoidal shape to reduce cabinet reflection causing colorations. The enclosure made of 15 mm and 18 mm birch faced plywood glued together in conjunction with dado joints to assure the highest quality of robustness.
TH-635
The POPE Professional® TH-612, TH-615, TH-625, TH-635, TH-618B and TH-628B loudspeakers are designed for distributed sound reinforcement and small outdoor venues. The system is based on low frequency drivers with high frequency compression driver coupled to horn. The enclosure is trapezoidal shape to reduce cabinet reflection causing colorations. The enclosure made of 15 mm and 18 mm birch faced plywood glued together in conjunction with dado joints to assure the highest quality of robustness.